Additional information
| Brand | Skil |
|---|---|
| Color | Silver |
| Blade Material | High Speed Steel, High Speed Steel, High Speed Steel |
| Surface Recommendation | Wood |
| Power Source | Corded Electric |
| Special Feature | Brushless |
| Included Components | SPT77WML 7-1/4 In. Magnesium Worm Drive with 24-Tooth Carbide blade and multi-functional wrench |
| Product Dimensions | 20.5"L x 7.75"W x 8.75"H |
| Voltage | 120 Volts |
| Warranty Type | Limited |
| Item Weight | 11.5 pounds |
| Blade Length | 4 Inches |
| Number of Teeth | 24 |
| Cutting Angle | 90 Degrees |
| Current Rating | 15 Amps |
| Specification Met | certified frustration-free |
| Global Trade Identification Number | 00039725035738, 00000346000016 |
| Handle Material | Metal |
| UPC | 737946169682 039725035738 732454911785 |
| Manufacturer | Chervon- SKIL |
| Part Number | SPT77WML-01 |
| Country of Origin | China |
| Item model number | SPT77WML-01 |
| Is Discontinued By Manufacturer | No |
| Size | One Size |
| Style | 7-1/4" Corded Circular Saw |
| Finish | Brushed |
| Material | Blend |
| Pattern | Solid |
| Shape | Rectangular |
| Item Package Quantity | 1 |
| Number of Handles | 2 |
| Special Features | Brushless |
| Batteries Included | No |
| Batteries Required | No |
Amazon Customer –
As a full time builder in the northeast for the last 16 years, Iv only used sidewinder saws since I started. That is all I have ever seen around here. But after doing a lot of online research and hearing all the west coast guys taking about the mag 77 I just wanted to try one out. I liked the idea of a left sided blade position, rafters hook, and also the ability to cut steeper angles without holding or pinning up the guard. Had no idea if I would like this thing or hate it.
Iv only had this thing for about 3 weeks now but have had the chance to cut studs, rafters, and sheathing with it. First thoughts of it was “heavy”! BUT- after more use I found out that that’s not a bad thing unless you just have wimpy arms and wrists! It seems like the weight helps the saw track much better then the lightweight sidewinders im use to. Also easier to control and not so finicky. I love not looking over the saw to see the blade, as Iv always been one to watch the blade more then the shoe guides. And wicked power. Not the high pitch fast blade, but big time torque. I’ll prob get the beam cutting attachment for it too.
Only thing Iv found being January in the northeast, the saw doesn’t love the cold weather. Framing last week in the cold, took a bit to get it warmed up and going full speed.
All in all, I love this saw and it will be my new “go to” framing saw. Great feel, excellent quality, good power, and sounds like it will hold up for a long time from all that Iv read. Sorry sidewinders, you’ve done me good for many years, but Iv found my new baby 😄.
Note- after more research, I definitely want to try the sidewinder southpaw by skilsaw. Looks like that could be a nice one too.
Paul McLeod –
This is an excellent saw. It’s much easier to see the cut line when using this saw, than with a sidewinder. It’s as light as the Makita circular saw that I had and has much more power. I purchased it because I had to cut a bunch of 6″x6″ vertical posts for a deck to cut in position and was concerned about kick-back issues when using the other saw. It worked perfectly cutting the vertical posts in position. At no time did the saw kick back as I have had happen when using sidewinder saws. I had several people helping and when making cuts, it was always the saw that everyone went to.
Sir Spendalot –
I have used these since the late 70’s and they are a terrific saw and a very safe durable saw !
But was finding the weight to be too much so I opted to buy this lightweight version.
It’s so much nicer to use than the original and easier on the arm. Love the hook to hang off joist or saw bench and also the bed is well marked.
I have owned only two of these , they last for about 20 years or more depending how you maintain them.
Definitely recommend for professional or novice they take a beating and and give you quality cutting as well as the power to rip long lengths with ease.
Ismael garcia –
Muy buena pero no sé compara al modelo anterior de ella la hd77 y otro punto bueno es que me llegó a tiempo
Sandoval –
Es muy liviano y muy bueno es realmente perfecto lo recomiendo al 💯% te hace el trabajo más fácil y es muy potente
Roy Muller –
Love this saw – replace my old direct drive circular saw with this beast. Suddenly my cuts were way more accurate.. 🙂
John Barr –
I started out using a craftsman sidewinder that was giving to me as a gift about 20 years ago. It always got the job done and became easier to use over time as my skill increased. As serviceable as it was (‘sufficient’), it was never a top end saw and left something to be desired.
Fast forward to my last project and the bearings have finally started to fail and I could hear the blade whining with no load. I don’t like the idea of a fast spinning cutting blade coming loose if the bearings failed, so I decided to replace it. I was actually excited to upgrade it, because thousands of sheets of plywood and 2x lumber have proven the saw was only sufficient.
I’m very weight sensitive due to a shoulder / arm issue and so I was deciding between the dewalt lightweight sidewinder (slightly lighter than my old craftsman’s) and of a style that I was immensely familiar with and knew how to use safely, and this worm drive, which was about a pound heavier (way lighter than other worm drives) and a completely new style I’d have to learn the nuances of safe use and handling.
I ended up with this worm drive, and all I can say is WOW. It cuts so much better and so smoothly that I’m amazed, and even a little irritated I was given such a cheap saw as a gift previously (not really, but this saw is SO MUCH BETTER in every way!). It’s difficult to put in words how much smoother and better the cut is, but that’s the first thing I noticed and continue to notice. I’m assuming this is due to the power or torque.
There is a slight learning curve how to do some things safely with this, versus a sidewinder, but that’s pretty minimal. Having been reasonably skilled with a sidewinder, I’m so happy I made the switch and would never go back. If I were brand new to saws, I wouldn’t appreciate the difference, and this *might* be a little too much saw to start out with (but not if you’re careful and have a good background with tools and safe use).
Just a recent example of how well this cuts, I was able to cut large width boards, a lot of smaller exterior trim and some compound miter cuts on 6” wide trim with this saw and a speed square. It’s stupid fast and accurate to do with this saw because of its precision adjustments and how well it cuts. In fact, some of the compound cuts are easier and safer with this circular saw than my miter saw, because I’d have to flip and reenter the cut on the opposite end of the miter to complete the cut with my 10” miter saw. This saw just zips all the way through in one stroke. This is so much faster making these cuts, that I’m not sure when I’ll get out the miter saw again. Additionally, not having to get out and clean up a second saw saves even more time, especially when I only have an hour or two to work some days.
Wayne Gretzky –
The best for a real man
Joe –
I returned it after I realized, it was the same saw as I have been using for years and is still going strong. One should note that these worm drive saws do require some maintenance (oil change, cleaning, etc.). If one were to keep a regular maintenance schedule, this saw will last for a long, long time.
JLM in AK –
The armature on my 1st wormdrive skilsaw finally burned out after about 40 years of use, This one had the magnesium base so is a bit lighter and it has the blade lock for easy changing of the blade (also has built in storage for the blade wrench. I do wish they would include a rip-guide. They want you to buy it separately abut that little piece of bent metal probably only costs them about fifty cents to make… as soon as this new saw arrived I ripped some 2 inch air dried birch slabs for a door…did not faze it…. I hope it lasts as long as the last one did…
William Sevier –
Not my first circular saw by any means but this is the first time I’ve used a worm drive saw. I’m not sure why I didn’t buy one sooner. It’s built heavy and that weight helps keep it going straight when ripping sheet goods. The worm drive give it plenty of torque for even wet pressure treated materials.
If you want a saw that will last, buy one of the Skil Worm Drive saws, the only downside is they are heavier than a sidewinder saw, but the benefits of the worm drive outweigh the extra weight…the blade is in the left on the worm drive too making visibility much better.