[grw id=547]
Sale!
Awaiting product image

104Pcs Oscillating Tool Detail Sanding Pads Kit 2Pcs Triangle Sanding Pads and 2Pcs Finger Sanding Pad 100Pcs Multitool Sandpaper Grit Fit for Finishing Wood Sanding Plaster

(13 customer reviews)

Original price was: $18.99.Current price is: $16.99.

  • Package Includes: Oscillating tool sanding attachments includes 2pc 80mm triangle sanding pad holder, 2pc finger sanding pad holder, 50pc-80mm sanding pad, 50 pc finger sanding pad. Assorted 60 80 100 120 240 grits oscillating tool sandpaper , 10 pcs each.
  • High Quality Material: Universal and quick release power oscillating tool sanding pads is made by carbon steel backing plate, hook and loop back, which is easy and quick to stick on and remove from the sander.The material is resistant to high temperature, so that the hook and loop are not easy to melt and separate.
  • Best for Wood Sanding : Use 60 / 80 grit for rough wood; Use 100 / 120 grit for general wood; Use 240 grit for final finishing of wood, plaster and other surfaces. Can meet the multi-purpose sanding needs of construction panels such as hardwood (oak, yellow pine) or plywood.
  • Compatible Models : Triangular sanding pad suitable for Fein, Bosch, Dremel, etc. Not compatible with Bosch GOP40-30, Bosch Starlock 12V / 18V, Dremel Multimax MM40 / MM45, Fein FMM350QSL and black and decker.
  • Oscillating Tool Sandpaper Set: Made of high quality aluminium oxide abrasive, triangular hook and loop sand paper is durable, professional quality multi tool accessories.Perfect for sanding a wide variety of materials, such as wood, metal. plaster and other surfaces.
  • multi tool sander attachment multi tool sanding attachment detail sander multitool sanding pads multi tool sander triangle sander multi tool sander attachment oscillating tool
Category:

Additional information

Product Dimensions

4 x 3 x 3 inches, 3.2 ounces
Date First Available

December 8, 2022
Manufacturer

towbluii
Country of Origin

China

13 reviews for 104Pcs Oscillating Tool Detail Sanding Pads Kit 2Pcs Triangle Sanding Pads and 2Pcs Finger Sanding Pad 100Pcs Multitool Sandpaper Grit Fit for Finishing Wood Sanding Plaster

  1. Dave –

    Well surpassed my expectations. I had a small, but important project that needed done.

    These preformed well and held up far longer than anticipated.
    The 2 different sizes give me just the amount of flexibility I needed to get the job done in place without removing things around the piece being sanded.

  2. Victor –

    The hooks and base of the Velcro did not hold the sandpaper and started melting the hooks. It would vibrate off. When I applied pressure to get the sandpaper to stick to the velcro it melted away within seconds. The larger size did the same thing.

  3. Kate –

    Love it

  4. BobbyZ –

    I bought these to sand miters on door casing moulding. I had been sanding them by hand, which was taking forever. These sanding pads are small, but they work great if you don’t try to put too much pressure on them. The tips of the triangle pieces tend to load up, but you can just remove and reposition them and use each corner, extending their life.

  5. Gary Y –

    These are well made and good value for money, buy with confidence

  6. David Z. –

    Se desbaratan al primer uso, no terminas una pieza con todo el paquete, ninguna termina funcional, todas son muy chafas.

  7. CLB –

    The sandpaper seemed fine and all fit well and was sanding okay. Things were going great. Then after a few minutes, the heat built up from the friction, melted the glue holding the rubber hook and loop pad to the metal base and the pad came apart. There was no damage, to the product, but it doesn’t make sense to use a heat sensitive glue on something that is going to get hot in use. I will likely try to re-glue the pad together and see if that works.

  8. Gunnar Swan –

    The attachments, they fit into my Harbor Freight tool.
    I was able to sand into some very tight spots and brighten the wood up so I could apply a finish.
    But at a cost.
    The sandpaper pieces kinda’ wear out soon, so if you look at a ‘square foot of sanding for this price’, these are pitiful.
    But if you consider just getting into the tightest of spots is all this is going to do, then they are economical, and quite effective.
    Would I buy again? Of course. What else is going to sand into these tight spots using my Harbor Freight tool?
    The project outcome. Stellar. Beautiful.
    They work. They get into tight spots. They fit tools.

  9. chris dulaney –

    Slightly different size face than dewalt but it fits well on the tool. Large number of sanding pads and two different shape faces. Shouldn’t run out any time soon

  10. JoshWs Reivews –

    As a passionate 3D printing hobbyist, I am constantly on the lookout for tools that can enhance my crafting experience. I recently purchased the 136Pcs Oscillating Tool Sanding Pad Kit, which includes 6 Triangle Sanding Pads and 130 assorted sandpapers, and I must say, it has exceeded my expectations!

    Exceptional Quality for the Price: Firstly, the quality of these sanding pads and papers is remarkable, especially considering the affordable price. In the world of 3D printing, where precision and smooth finishes are key, these tools have proven to be invaluable. The variety of grits available allows for fine-tuning of prints, from rough shaping to final polishing.

    Perfect for 3D Printing Projects: Each sanding pad attaches easily to my oscillating tool, making it a breeze to switch between grits during a project. The durability of these pads is impressive; they hold up well even after multiple uses, which is a testament to their quality. The 130 sandpapers come in a range of grits, perfect for addressing the unique challenges of 3D printed objects. Whether it’s smoothing out layer lines or refining intricate details, these sandpapers make the job easier and more efficient.

    A Must-Have for Hobbyists: This kit has become a staple in my 3D printing toolkit. The versatility it offers makes it suitable for a wide range of projects, not just limited to 3D printing. From woodworking to metalwork, these sanding pads and papers are versatile enough to handle it all.

    Final Thoughts: Overall, the 136Pcs Oscillating Tool Sanding Pad Kit is an outstanding investment for anyone involved in 3D printing or general crafting. Its combination of quality, variety, and affordability makes it a standout product. I highly recommend it to fellow hobbyists looking for an effective and budget-friendly solution to their sanding needs. Five stars all the way!

  11. Kerry –

    Good value. Quality sanding pads if you want to use the Fein as a small sander.

  12. Victor –

    Performed better than expected. Great value for the price. Will order again as needed.

  13. Juan M. –

    The price and the amount of pieces well worth what I paid for it

Add a review

Your email address will not be published. Required fields are marked *

Related products